3pc Witches & Cauldron Bath Bomb Mold STL File for 3D printing - FILE ONLY
The mold prints in 3 pieces; a wall guide, a base plate and a top plate. Place the base plate at the bottom of the wall guide, place the bath bomb mix inside and press with the top plate. The top place goes inside the wall guide to press the bath bomb mixture. Then remove the base plate and push the bath bomb out using the top plate.
Terms of Use: 🚫 This file cannot be resold or shared in any way ✅ Prints from this file can be sold – no commercial license required ✅ Creations made from the prints of this mold can be sold – no commercial license required Thank you for your co-operation!
The file prints in three parts. Size can be altered in your slicer program. The print does not require any support. Can be printed in 0.2 mm nozzle and a 20% infill.
again a tiny bit thinner in height than my other supplier but the mould is good quality and the design is good nice and easy to get out of the mould as well
again a tiny bit thinner in height than my other supplier but the mould is good quality and the design is good nice and easy to get out of the mould as well
