FREE SHIPPING on all orders

Tutorial: How to make a Pusheen Coaster with Epoxy Resin

Learn how to make a Pusheen themed coaster with epoxy resin. Here you will find a step by step tutorial guide which you can follow to create your own resin coaster.

pusheen resin coaster

For this project you will need the following supplies:

  • epoxy resin
  • mixing cups & sticks
  • Coaster Silicone Mold
  • Pusheen sticker flake
  • Heart pearl embeds
  • iridescent paw confetti
  • iridescent pink heart confetti
  • pink mica powder
  • green mica powder
  • iridescent pink glitter powder
  • iridescent green glitter powder

 supplies needed for this project

Step 1: Prepare and mix your resin.
At this stage you will only need enough to fill the edges and to have a thin layer in the middle for embedding the sticker and the rest of the embellishments. 

Step 2: Pour the clear resin into the silicone mold - just enough to have a thin layer in the middle of the mold.

pour clear resin into coaster silicone mold

Step 3: Place and embed the sticker into the resin.
Make sure to press the sticker down evenly and all over using a wooden stick to make sure that no air bubbles have been trapped in front of the sticker.

place sticker into resin layer

Step 4: Sprinkle in the heart and paw confetti along with the pearl hearts and move them around to place them to your liking. 

add confetti

Step 5: Wait for the first layer of resin to cure.

Step 6: Prepare another batch of resin and divide into 2 mixing cups.

Step 7: To the first cup add green mica powder and iridescent green glitter powder.

Step 8: To the second cup add pink mica powder and iridescent pink glitter powder.

preparing colored resin

Step 9: Mix each cup well to thoroughly distribute the pigment and glitter.

mixed colored resin

Step 10: Pour the colored resin mixes into the coaster silicone mold.
This is the last layer so you will need to fill up the mold completely.

pouring resin

Pour the colors at different points to get a pattern of your liking.

Step 11: Wait for the resin to cure.

resin poured

Step 12: De-mold the coaster from the silicone mold when the second layer of resin has finished curing.

removing resin coaster from silicone mold

Step 13: Your Pusheen resin coaster is complete and ready for you to enjoy or gift to someone special.

completed resin coaster

 

resin coaster

 

Watch the video tutorial:

 

Leave a comment

Name .
.
Message .

Please note, comments must be approved before they are published