Resin Tutorial: How to make dominoes | White & Gold Marble
Supplies
- epoxy resin
- dominoes set silicone mold
- mixing cups
- mixing sticks
- opal shimmer powder
- cream alcohol ink
- gold marble mica powder
- black acrylic paint
- rubbing alcohol
Instructions
Step 1: Prepare and mix resin.
Step 2: Set aside around 20 ml of the resin and divide the rest equally.
Step 3: To the 20 ml of resin add gold marble mica powder.
Step 4: To both of the other cups add cream alcohol ink. Add small amounts of the ink at a time. If needed add more later to get the desired result.
Step 5: Add opal shimmer powder to one of the cups with the cream ink.
Step 6: Mix each cup well, making sure that the pigments are thoroughly and evenly distributed into the resin.
Step 7: Pour the resin into the silicone mold. For the marble effect, add some white resin at one end of a domino, then add a small amount of gold resin using the stir stick. Fill the rest of the cavity with white resin mix. Watch the video for a better understanding for how to do this step.
Step 8: Repeat step 7 for the rest of the dominoes.
Step 9: Wait for the resin to cure and fully harden.
Step 10: When the resin has fully cured, de-mold the dominoes from the silicone mold.
Step 11: Paint the detail of the dominoes with black acrylic ink.
Step 12: Wait for the paint to dry.
Step 13: Dip a cotton swab into rubbing alcohol and clean the excess paint from the surface of the dominoes.
Step 14: If needed, polish the dominoes using a dry cotton ball/swab.
