Get 1 Free mold when you buy 3 molds - automatically applies when you add 4 or more molds into your cart - Ending 30 June 2024

Discover the Top Reasons for Resin Failure

Resin is a versatile material that is used in various crafts and DIY projects. It can be frustrating when your resin does not cure properly, leaving you with a sticky or soft finish. In this blog post, we will explore some common reasons why resin may not cure and provide solutions to help you achieve the perfect result.

1. Incorrect Resin to Hardener Ratio

One of the most common reasons for resin not curing is an incorrect ratio of resin to hardener. It is crucial to follow the manufacturer's instructions and measure the components accurately. Even a slight deviation from the recommended ratio can affect the curing process.

For more information on how to measure your resin go to - The Most Accurate Ways to Measure Resin

2. Insufficient Mixing

Proper mixing is essential for resin to cure correctly. If the resin and hardener are not thoroughly mixed, the curing process may be compromised. Make sure to mix the components for the recommended amount of time, scraping the sides and bottom of the container to ensure even distribution.

3. Low Temperature

Resin cures best at specific temperatures. If the ambient temperature is too low, the curing process may be significantly slowed down or even halted. Ensure that you are working in a warm environment within the recommended temperature range specified by the manufacturer.

4. Humidity

High humidity can also affect the curing of resin. Moisture in the air can interfere with the chemical reaction, leading to a sticky or tacky finish. Try to work in a dry environment or use a dehumidifier to reduce the moisture content in the air.

5. Contaminated Materials

Contaminated materials, such as dirty mixing cups or tools, can introduce impurities into the resin, affecting its ability to cure properly. Always ensure that your equipment is clean and free from any residue or contaminants before using them with resin.

6. Inadequate Ventilation

Some resins emit fumes during the curing process, which can be harmful if inhaled. It is essential to work in a well-ventilated area or use a respirator to protect yourself. Inadequate ventilation can also lead to a slower curing process or a soft finish.

7. UV Exposure

If you are using a UV resin, insufficient exposure to UV light can prevent proper curing. Make sure that the resin is exposed to the recommended amount of UV light for the specified duration. Insufficient exposure can result in a sticky or uncured surface.

8. Old or Expired Resin

Resin has a shelf life, and using old or expired resin can lead to curing issues. Check the expiration date on your resin bottles and ensure that you are using fresh materials. Using expired resin can result in a tacky or soft finish that will not fully cure.


When your resin does not cure as expected, it can be frustrating. However, by understanding the common reasons for curing issues and implementing the appropriate solutions, you can achieve the desired results. Remember to follow the manufacturer's instructions, work in suitable conditions, and use clean materials to ensure a successful resin curing process.

Leave a comment

Name .
Message .
Free Gift